3G Backup on Mikrotik

I was playing with my Mikrotik at home (RB951G-2HnD) trying to learn more stuff and though I should put of some use to my 3G USB dongle (HUAWEI E220). This came in handy as next day my main connection had problems and needed a backup connection to the Internet.

PLUG IN THE MODEM

Plug the 3G USB dongle and check on Mikrotik using the CLI commands "system resource usb print". If it can recognize the 3G modem then you are ok .See the command output below :

QinQ with Cisco Catalyst switches

Below a simple topology using QinQ tagging (officially known as IEEE 802.1ad or unofficially IEEE 802.1 QinQ ) on Cisco Catalyst C3550 switches.

C-VLANS 10 and 20 come from customer side and are encapsulated in the S-VLAN 1800.

This feature is also called VLAN double tagging or Vlan stacking, or Nested VLANs (Allied Telesis) or vMAN technology ( Extreme Networks).

VirtualBox in GNS3 under Linux part2

Continuing the previous post  VirtualBox in GNS3 under Linux part1, I will show below the steps on how to make GNS3 work with Virtualbox using emulated VirtualBox host-only adapters. 

STEP 1 : Install VirtualBox and VMs
Install VirtualBox (current version is 4.3.6) and your favorite Virtual Machines.

VirtualBox in GNS3 under Linux part1

Following my previous post on Installing GNS3 v0.8.6 on Linux , now will make GNS3 work together with VirtualBox.

By the time GNS3 started supporting VirtualBox virtualization ( v0.8.1 ), things were made easier in using VMs in GNS3. You just tell to GNS3 which VMs to load. see below the steps in detail. For more info see GNS3 website.

Later ( easy installation ) it became even simpler and no need any more to start GNS3/VirtualBox in root access mode.

STEP 1 : Install VirtualBox and VMs
Install VirtualBox (current version is 4.3.6) and your favorite Virtual Machines.

802.1Q VLAN trunk in Linux

I need to configure an Ethernet interface as an IEEE 802.1q VLAN trunk on Linux Mint for Lab purposes so I can connect GNS3 with a physical Cisco Switch. So I will create 6 vlan interface using VLAN ID 101-106 on eth0 interface.

Install VLAN package

 sudo apt-get install vlan 

Basic RouterOS under VirtualBox

Following my post on Installing Mikrotik RouterOS in VirtualBox, here is some basic configuration setup if you want to play around with RouterOS.
For real hand-on experience better to buy small a Mikrotik (e.g RB750, RB951G-2HnD) , they are very cheap. Check here for the products and prices.

Add more Ethernet Interfaces

One simple way to add more interface is to use USB-to-Ethernet adapters. Once installed check that they appear correctly under host OS Linux.

Installing GNS3 v0.8.6 on Linux

Below are the basic steps for installing GNS3 v0.8.6 on Linux Mint 15 ( should also work for other similar flavors) using the excellent work by  claydon_dan as posted in GNS3 Forum.

This version makes things much easier in installing GNS3 and Dynamips using PPA (Personal Package Archive). Reposting the steps below.

Step 1: Add PPA to your system

sudo add-apt-repository ppa:gns3/ppa

How to find motherboard model in Linux

There are many ways, using command line in LINUX, to see the motherboard model of the computer. 
You can use lshw or dmidecode. Read more on cli syntax from man commands.

Installing TFTP server in Linux

I recently needed a file server to keep boot images and configuration files to be transferred on switches and routers.

I decided to use TFTP because of its simplicity and low memory requirements
Below the installation steps  used on a  computer loaded with Linux Mint 14.

Installing Mikrotik RouterOS under VirtualBox

MikroTik RouterOS is a Linux based operating system that runs on proprietary hardware (RouterBOARD), or on standard x86-based computers. Some training videos here.

You can install it in VirtualBox and play around with this virtual device.
For real hands on experience with Mikrotiks , better buy the actual equipment since they are cheap.

Go to their website and download the latest Router OS for PC/86

At this time v5.18 is latest stable available version. Also available in torrent.

Create a new Virtual Machine in VirtualBox as per example below.

xDSL- Loop qualification

Below some material found on the web ( webinars, application notes, white papers, articles etc.) on DSL troubleshooting , mostly from companies that manufacture xDSL Testing equipment.

SSH Tunneling

You can create SSH Tunnels using different kinds of forwarding like
a) Local Port Forwarding, 
b) Remote Port Forwarding,
c) Dynamic Port Forwarding
c) X Forwarding

For a full command syntax check the online man pages for ssh  here